[2016-NEW!] Newest 70-410 Exam Questions Ensure 100% Exam Passing From PassLeader (Question 61 – Question 90)

16 May

Being tormented to get well prepared for your 70-410 exam? Don’t worry! PassLeader now offer the first-hand 70-410 exam dumps, you will pass 70-410 exam for your first try with PassLeader’s latest real 485q 70-410 exam questions. We offer you the newest 70-410 exam study guide with VCE test engine or PDF format braindumps, you can get the basic knowledge and all details about 70-410 exam. Do not hesitate to try our high quality 485q 70-410 practice tests!

keywords: 70-410 exam,485q 70-410 exam dumps,485q 70-410 exam questions,70-410 pdf dumps,70-410 practice test,70-410 vce dumps,70-410 study guide,70-410 braindumps,Installing and Configuring Windows Server 2012 R2 Exam

P.S. Download Free 70-410 PDF Dumps and Preview PassLeader 70-410 VCE Dumps At The End Of This Post!!! (Ctrl+End)

QUESTION 61
You have a server named Server2 that runs Windows Server 2012 R2. You open Server Manager on Server2 as shown in the exhibit. (Click the Exhibit button.) The Everyone group has read share permission and read NTFS permission to Sources. You need to ensure that when users browse the network, the Sources share is not visible. What should you do?

A.    From the properties of the Sources folder, remove the Sources share, and then share the Sources folder as Sources$
B.    From the properties of the Sources folder, deny the List Folder Contents permission for the Everyone group
C.    From the properties of the Sources share, configure access-based enumeration
D.    From the properties of the Sources folder, configure the hidden attribute

Answer: A

QUESTION 62
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Print and Document Services server role installed. You connect a new print device to the network. The marketing department and the sales department will use the print device. You need to provide users from both departments with the ability to print to the network print device. The solution must ensure that if there are multiple documents queued to print, the documents from the sales users print before the documents from the marketing users. What should you do on Server1?

A.    Add two printers. Modify the priorities of each printer and the security settings of each printer.
B.    Add two printers and configure printer pooling.
C.    Add one printer and configure printer pooling.
D.    Add one printer. Modify the printer priority and the security settings.

Answer: A

QUESTION 63
Your network contains an Active Directory domain named contoso.com. The network contains a server named Server1 that runs Window Server 2012 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1). Server1 and Server2 are member server. You need to ensure that you can manage Server2 from Server1 by using Server Manager. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)

A.    Install Remote Server Administration Tools on Server1.
B.    Install Windows Management Framework 3.0 on Server2.
C.    Install the Windows PowerShell 2.0 engine on Server1.
D.    Install Microsoft .NET Framework 4 on Server2.
E.    Install Remote Server Administration Tools on Server2.

Answer: BD

QUESTION 64
Hotspot Question
You have a DNS server named Server1. Server1 runs Windows Server 2012 R2. The network ID is 10.1.1.0/24. An administrator creates several reverse lookup zones. You need to identify which reverse lookup zone is configured correctly. Which zone should you identify? To answer, select the appropriate zone in the answer area.

Answer:

QUESTION 65
Hotspot Question
You have a server named Server1. Server1 runs Windows Server 2012 R2. Server1 has two network adapters. Each network adapter must be configured as shown in the following table.

You need to configure the correct IPv6 address prefix for each network adapter. Which prefix should you select for each network adapter? (To answer, drag the appropriate IPv6 prefix to the correct network adapter in the answer area. Each prefix may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.)

Answer:

QUESTION 66
Drag and Drop Question
Your company has a main office that contains 225 client computers. The client computers are located on a subnet that uses the network ID of 10.10.1.0/24. The company plans to open two branch offices. The offices will be configured as shown in the following table.

You need to select a network prefix for each office to ensure that there are enough IPv4 addresses for each client computer. The solution must minimize the number of unused IP addresses. Which network prefixes should you select? To answer, drag the appropriate network prefix to the correct branch office in the answer area.

Answer:

QUESTION 67
Your infrastructure divided in 2 sites. You have a forest root domain and child domain. There is only one DC on site 2 with no FSMO roles. The link goes down to site 2 and no users can log on. What FSMO roles you need on to restore the access?

A.    Infrastructure master
B.    RID master
C.    Domain Naming master
D.    PCD emulator

Answer: D

QUESTION 68
You perform a Server Core Installation of window Server 2012 R2 on server named Server1. You need to add a graphical user interface (GUI) to server1. Which tool should you use?

A.    the Add-WindowsFeature cmdlet
B.    the Install-Module cmdlet
C.    the setup.exe command
D.    the Add-WindowsPackage cmdlet

Answer: A

QUESTION 69
A network technician installs Windows Server 2012 R2 Standard on a server named Server1. A corporate policy states that all servers must run Windows Server 2012 R2 Enterprise. You need to ensure that Server1 complies with the corporate policy. You want to achieve this goal by using the minimum amount of administrative effort. What should you perform?

A.    a clean installation of Windows Server 2012 R2
B.    an upgrade installation of Windows Server 2012 R2
C.    online servicing by using Dism
D.    offline servicing by using Dism

Answer: C

QUESTION 70
You have a domain controller named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role installed. Server1 hosts a DNS zone named contoso.com and a GlobalNames zone. You discover that the root hints were removed from Server1. You need to view the default root hints of Server1. What should you do?

A.    From Event Viewer, open the DNS Manager log.
B.    From Notepad, open the Cache.dns file.
C.    From Windows Powershell, run Get-DNSServerDiagnostics.
D.    From nslookup, run root server1.contoso.com

Answer: B

QUESTION 71
Your company has a main office and two branch offices. The offices connect to each other by using a WAN link. In the main office, you have a server named Server1 that runs Windows Server 2012 R2. Server1 is configured to use an IPv4 address only. You need to assign an IPv6 address to Server1. The IP address must be private and routable. Which IPv6 address should you assign to Server1?

A.    fe80:ab32:145c::32cc:401b
B.    ff00:3fff:65df:145c:dca8::82a4
C.    2001:ab32:145c::32cc:401b
D.    fd00:ab32:14:ad88:ac:58:abc2:4

Answer: D

QUESTION 72
Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8. You deploy a server named Server1 that runs Windows Server 2012 R2. You install a new client-server application named App1 on Server1 and on the client computers. The client computers must use TCP port 6444 to connect to App1 on Server1. Server1 publishes the information of App1 to an intranet server named Server2 by using TCP port 3080. You need to ensure that all of the client computers can connect to App1. The solution must ensure that the application can connect to Server2. Which Windows Firewall rule should you create on Server1?

A.    an inbound rule to allow a connection to TCP port 3080
B.    an outbound rule to allow a connection to TCP port 3080
C.    an outbound rule to allow a connection to TCP port 6444
D.    an inbound rule to allow a connection to TCP port 6444

Answer: D

QUESTION 73
Your network contains an Active Directory domain named contoso.com. All user accounts in the sales department reside in an organizational unit (OU) named OU1. You have a Group Policy object (GPO) named GPO1. GPO1 is used to deploy a logon script to all of the users in the sales department. You discover that the logon script does not run when the sales users log on to their computers. You open Group Policy Management as shown in the exhibit. You need to ensure that the logon script in GPO1 is applied to the sales users. What should you do?

A.    Enforce GPO1.
B.    Modify the link order of GPO1.
C.    Modify the Delegation settings of GPO1.
D.    Enable the link of GPO1.

Answer: D

QUESTION 74
Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The domain contains a server named Server1. You install the Windows PowerShell Web Access gateway on Server1. You need to provide administrators with the ability to manage the servers in the domain by using the Windows PowerShell Web Access gateway. Which two cmdlets should you run on Server1? (Each correct answer presents part of the solution. Choose two.)

A.    Set-WSManQuickConfig
B.    Set-WSManInstance
C.    Add-PswaAuthorizationRule
D.    Set-BCAuthentication
E.    Install-PswaWebApplication

Answer: CE

QUESTION 75
You have a server named Server 1 that runs Windows Server 2012 R2. Server 1 has the Hyper-V server role installed. You have fixed-size VHD named Files.vhd. You need to make the contents in Files.vhd available to several virtual machines. The solution must meet the following requirements:
– Ensure that if the contents are changed on any virtual machine, the changes are not reflected on the other virtual machines.
– Minimize the amount of disk space used.
What should you do?

A.    Create a fixed-size VHDX. Transfer the information from Files.vhd to the new VHDX file
B.    Convert Files.vhd to a dynamically expanding VHD
C.    Create a dynamically expanding VHDX. Transfer the information from Files.vhd to the new VHDX file
D.    Create differencing VHDs that use Files.vhd as the parent disk

Answer: D

QUESTION 76
Your network contains an Active Directory domain named adatum.com. The domain contains several thousand member servers that run Windows Server 2012 R2. All of the computer accounts for the member servers are in an organizational unit (OU) named ServersAccounts. Servers are restarted only occasionally. You need to identify which servers were restarted during the last two days. What should you do?

A.    Run dsquery computer and specify the -stalepwd parameter.
B.    Run dsquery server and specify the -o parameter.
C.    Run Get-ADComputer and specify the lastlogon property.
D.    Run Get-ADComputer and specify the SearchScope parameter.

Answer: C

QUESTION 77
Your network contains three servers that run Windows Server 2012 R2. The servers are configured as shown in the following table (click Exhibit). Server3 is configured to obtain an IP address automatically. You need to ensure that Server3 only receives an IP address from Server1. The IP address must always be the same. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)

A.    Create an exclusion on Server1
B.    Create a filter on Server1
C.    Create a reservation on Server2
D.    Create a reservation on Server1
E.    Create a filter on Server2

Answer: DE

QUESTION 78
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2 and a client computer named Computer1 that runs Windows 8. DC1 is configured as a DHCP server as shown in the exhibit. (Click the Exhibit button.) Computer1 is configured to obtain an IP address automatically. You need to ensure that Computer1 can receive an IP address from DC1. What should you do?

A.    Disable the Allow filters
B.    Disable the Deny filters
C.    Activate Scope [10.1.1.0] Contoso.com
D.    Authorize dc1.contoso.com

Answer: D

QUESTION 79
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 that has the DNS Server server role installed. Server1 hosts a primary zone for contoso.com. The domain contains a member server named Server2 that is configured to use Server1 as its primary DNS server. From Server2, you run nslookup.exe as shown in the exhibit. (Click the Exhibit button.) You need to ensure that when you run Nslookup, the correct name of the default server is displayed. What should you do?

A.    From Advanced TCP/IP Settings on Server1, add contoso.com to the DNS suffix list
B.    On Server1, modify the Security settings of the contoso.com zone
C.    On Server1, create a reverse lookup zone
D.    From Advanced TCP/IP Settings on Server2, add contoso.com to the DNS suffix list

Answer: C

QUESTION 80
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that hosts the primary DNS zone for contoso.com. All client computers are configured to use DC1 as the primary DNS server. You need to configure DC1 to resolve any DNS requests that are not for the contoso.com zone by querying the DNS server of your Internet Service Provider (ISP). What should you configure?

A.    Name server (NS) records
B.    Condition& forwarders
C.    Forwarders
D.    Naming Authority Pointer (NAPTR) DNS resource records (RR)

Answer: C

QUESTION 81
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains a server named Server1 that runs Windows Server 2012 R2. You need to ensure that when users log on to Server1, their user account is added automatically to a local group named Group1 during the log on process. Which Group Policy settings should you modify?

A.    Restricted Groups
B.    Security Options
C.    User Rights Assignment
D.    Preferences

Answer: D

QUESTION 82
Your network contains an Active Directory domain named contoso.com. You need to prevent users from installing a Windows Store app named App1. What should you create?

A.    An application control policy executable rule
B.    An application control policy packaged app rule
C.    A software restriction policy certificate rule
D.    An application control policy Windows Installer rule

Answer: B

QUESTION 83
Your company’s security policy states that all of the servers deployed to a branch office must not have the graphical user interface (GUI) installed. In a branch office, a support technician installs a server with a GUI installation of Windows Server 2012 on a new server, and then configures the server as a DHCP server. You need to ensure that the new server meets the security policy. You want to achieve this goal by using the minimum amount of Administrative effort. What should you do?

A.    Reinstall Windows Server 2012 on the server.
B.    From Windows PowerShell, run Uninstall-WindowsFeature Desktop-Experience.
C.    From Windows PowerShell, run Uninstall-WindowsFeature PowerShell-ISE.
D.    From Server Manager, uninstall the User Interfaces and Infrastructure feature.

Answer: D

QUESTION 84
Your network contains an Active Directory domain named contoso.com. The domain contains 500 servers that run Windows Server 2012 R2. You have a written security policy that states the following:
– Only required ports must be open on the servers.
– All of the servers must have Windows Firewall enabled.
– Client computers used by Administrators must be allowed to access all of the ports on all of the servers.
– Client computers used by the Administrators must be authenticated before the client computers can access the servers.
You have a client computer named Computer1 that runs Windows 8. You need to ensure that you can use Computer1 to access all of the ports on all of the servers successfully. The solution must adhere to the security policy. Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)

A.    On Computer1, create a connection security rule.
B.    On all of the servers, create an outbound rule and select the Allow the connection if it is secureoption.
C.    On all of the servers, create an inbound rule and select the Allow the connection if it is secureoption.
D.    On Computer1, create an inbound rule and select the Allow the connection if it is secureoption.
E.    On Computer1, create an outbound rule and select the Allow the connection if it is secureoption.
F.    On all of the servers, create a connection security rule.

Answer: ACF

QUESTION 85
Drag and Drop Question
Your network contains three servers. The servers are configured as shown in the following table.

Your company plans to standardize all of the servers on Windows Server 2012 R2. You need to recommend an upgrade path for each server. The solution must meet the following requirements:
– Upgrade the existing operating system whenever possible.
– Minimize hardware purchases.
Which upgrade path should you recommend for each server? To answer, drag the appropriate upgrade path to each server in the answer area. Each upgrade path may be used once, more than once, or not at all.

Answer:

QUESTION 86
Your network contains a file server named Server1 that runs Windows Server 2012 R2. All client computers run Windows 8. Server1 contains a folder named Folder1. Folder1 contains the installation files for the company’s desktop applications. A network technician shares Folder1 as Share 1. You need to ensure that the share for Folder1 is not visible when users browse the network. What should you do?

A.    From the properties of Folder1, deny the List Folder Contents permission for the Everyone group.
B.    From the properties of Folder1, remove Share1, and then share Folder1 as Share1$.
C.    From the properties of Folder1, configure the hidden attribute.
D.    From the properties of Share1, configure access-based enumeration.

Answer: B

QUESTION 87
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and a server named Server2 that runs Windows Server 2008 R2 Service Pack 1 (SP1). Both servers are member servers. On Server2, you install all of the software required to ensure that Server2 can be managed remotely from Server Manager. You need to ensure that you can manage Server2 from Server1 by using Server Manager. Which two tasks should you perform on Server2? (Each correct answer presents part of the solution. Choose two.)

A.    Run the systempropertiesremote.execommand
B.    Run the Enable-PsRemotingcmdlet
C.    Run the Enable-PsSessionConfigurationcmdlet
D.    Run the Confiqure-SMRemoting.ps1script
E.    Run the Set-ExecutionPolicycmdlet

Answer: DE

QUESTION 88
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains a print server named Server1 that runs Windows Server 2012 R2. You share several printers on Server1. You need to ensure that you can view the printer objects associated to Server1 in Active Directory Users and Computers. Which option should you select? To answer, select the appropriate option in the answer area.

Answer:

QUESTION 89
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2. You log on to Server1. You need to retrieve the IP configurations of Server2. Which command should you run from Server1?

A.    winrs -r:server2 ipconfig
B.    winrm get server2
C.    dsquery *-scope base-attr ip, server2
D.    ipconfig > server2.ip

Answer: A

QUESTION 90
You work as an administrator at L2P.com. The L2P.com network consists of a single domain named L2P.com. All servers on the L2P.com network have Windows Server 2008 R2 installed. Some of L2P.com’s workstations have Windows 7 installed, while the rest have Windows 8 installed. After installing a new Windows Server 2012 computer in the L2P.com domain, you configure it to run the File and Storage Services server role. You are instructed to create a shared folder on the new server, and configure the use of Previous Versions for restoring files located in the shared folder. Which of the following actions should you take?

A.    You should consider configuring the Shadow Copies settings on the new server.
B.    You should consider configuring the Snapshot settings on the new server.
C.    You should consider configuring the Background Copy settings on the new server.
D.    You should consider configuring the Permission settings on the new server.

Answer: A

Download Free 70-410 PDF Dumps From Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpfnJzOE1fWnlJOWVtaE93SnJNT3gtaTNYYnVpZkw5THBSMWRKbFlfaXh1azg (Explanation For Every Question Is Available!)

PassLeader 70-410 VCE Dumps Screenshots:

Download New 70-410 VCE Dumps From PassLeader: http://www.passleader.com/70-410.html (New Questions Are 100% Available and Wrong Answers Have Been Corrected!!!)